35
General information
Tip: For more
information about PC Suite,
see the PC Suite Guide on
the CD-ROM.
2 Insert the CD-ROM into the CD-ROM drive of your computer.
3 Either: Connect your communicator to your computer using the adapter cable
supplied in the sales package.
Or: Prepare the communicator and the computer for an infrared connection. For
more information, see ‘To activate the infrared connection’ on page 35.
4 If the CD-ROM user interface does not open automatically, double-click the file
‘Nokia9210i.exe’ in the CD-ROM file structure.
5 Select a program you want to install from the CD-ROM user interface and click
‘Install’.
Tip: See the Add on
Applications Guide for
information on other
software available for your
communicator.
Note: Remember to install applications in the same language as your
communicator.
Use a memory card to gain more space for the different applications and files on
the CD-ROM.
Note: For information on the installable applications, see the Software on CD-
ROM Guide on the CD-ROM.
To activate the infrared connection
Tip: To activate the
infrared, you can also press
the Menu key and select
Tools > Receive via infrared.
1 Make sure that the infrared port of the communicator faces the infrared port
of the other device.
2 To activate the infrared connection, press Chr + (the key with the infrared
symbol; this key is on the right-hand side of the keyboard, next to the Enter
key).
3 To end the infrared connection, press Chr + again.
General_information_Iss3.doc Page 35 Friday, October 18, 2002 5:37 PM
To Next Page
Loading...
