46
Phone
Tip: If you start making a
new call during the current
call, the current call is put
on hold automatically.
Hold/Activate - Hold allows you to put the current call on hold. To activate the
original call again, select Activate.
New call - Puts the active call on hold and dials a new phone number.
Send DTMF - Transmits DTMF tones. See ‘To send DTMF tones during a call’ on page
77.
End active call - Ends the active call.
End all calls - Ends both the active and held call.
Contacts - Opens the phone book.
Menu - Opens the Menu.
Mute/Unmute - Switches the microphone of the communicator off or on. If the
communicator is connected to a handsfree car kit, Mute also turns off the
microphone of the car kit.
Swap - Allows you to alternate between two calls, an active and a held call.
Transfer - Enables you to connect two voice calls together and disconnect yourself
from both calls. See ‘To transfer calls’ on page 76.
Conference - If one call is active and another call is on hold, this option merges
them into a conference call.
Private - During a conference call, Private allows you to converse privately with a
selected participant.
Keypad lock
The keypad lock makes accidental key presses ineffective.
Linda1.book Page 46 Friday, April 12, 2002 8:31 PM
To Next Page
Loading...
