deactivates in between background
scans.
To stop the background scans, select
Menu > Ctrl. panel > Settings and
Connection > Wireless LAN > Show
WLAN availability > Never. You can
still manually scan for available WLANs
and connect to WLANs as usual.
To increase the background scan
interval, select Show WLAN
availability > Yes, and define the
interval in Scan for networks.
Q: Why can't I browse the web even
though the WLAN connection is
working and the IP settings are
correct?
A: Check that you have defined the
HTTP/ HTTPS proxy settings correctly in
the advanced settings of your WLAN
access point.
Q: How do I check the signal quality
of my WLAN connection?
Select Menu > Ctrl. panel >
Connectivity > Conn. mgr. and Active
data connections > Options >
Details. If the signal quality is weak or
moderate, you may encounter
connection problems. Try again closer
to the access point.
Q: Why do I have problems with the
security mode?
A: Check that you have configured the
security mode correctly, and that it is
the same that the network uses. To
check the security mode the network
uses, select Menu > Ctrl. panel >
Connectivity > Conn. mgr. and Active
data connections > Options >
Details.
Check also the following: you have the
correct WPA mode (preshared key or
EAP), you have disabled all EAP types
that are not needed, and all the EAP type
settings are correct (passwords, user
names, certificates).
Q: Why can’t I select a contact for my
message?
A: The contact card does not have a
phone number, an address, or an e-mail
Troubleshooting 177
© 2010 Nokia. All rights reserved.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
