25
G-TIDE E66 User Manual
4． When the power sign in the right upper part of the
screen is full and is not flashing any more, it indicates
that the battery is fully recharged.If the mobile phone
is recharged when it is powered off, the screen will
display the recharging completion sign. The process
will take two to three hours.During recharging, the
battery, mobile phone and recharger will be heated,
which is normal.
5． After the battery is fully charged, please disconnect
the mobile phone & the recharger from the AC power
socket.
Warning: During recharging, the mobile phone should be
placed in a ventilated spot of the temperature of -40°C to
+55°C. Make sure to use the recharger provided by the
mobile phone vendor. Using authorized recharger may cause
danger, and will violate the recognition and warranty
provisions of this manual.
3.8 Using Headset
When you plug the headset to the headset port
26
G-TIDE E66 User Manual
(recharger/USB data cable interface) on the left side of the
mobile phone, the user profile of the mobile phone will be
automatically switched to the headset mode.By setting
automatic receiving, you can listen to music or receive a call
with the headset.
3.9 Security Passwords
3.9.1 PIN Code
The PIN (personal identification number) code can prevent
others from using your SIM card without your permission.
3.9.2 PIN2 Code
While entering “Call accounting” and “Fixed dialing”, you
need to contact the network carrier to confirm whether your
SIM card supports such functions. If you enter a wrong PIN2
for three consecutive times, the PIN2 code will be locked.
Only entering the correct PUK2 code can unlock the PIN2,
which is provided with the SIM card.
To Next Page
Loading...
