35
G-TIDE E66 User Manual
phone number, including country code.
Dial a fixed number: “+” country code + complete phone
number + dialing
4.1.9 Options during a Call
On the Call interface, press the right soft key or press OK key
to enter the call options. This call option is visible only during
the call. In addition, “incoming call diverting", “multi-party call”,
“call holding” and “call waiting” functions need to be
supported by the network. Please contact your network
service provider.
In the call option, you can perform the following operations:
Voice change mode: Set the call voice mode. With this
function, the other party of the call will hear a changed
voice based on the setting
Maintaining single-line call: Maintain the current call.
End single-line call: End the current call.
New call: During a “multi-party call”, you can pause one
of the callers, and dial a new number.
Phonebook: Enter the phonebook menu.
36
G-TIDE E66 User Manual
Message center: Enter the message function menu.
Voice recorder: Perform voice recording of the call
content.
Mute/recovery: Enable or disable the Mute mode.
Dual-tone multi-frequency (DTMF): Send the DTMF
signals.
Note: Some menu options occur only in special cases or
need the support of local network.
4.2 Inputting Text
This mobile phone provides eight input methods: smart pinyin,
smart ABC, smart abc, number input, pinyin, simplified
Chinese stroke input, multitap ABC, and multitap abc.
On the text input interface, press the “#” key to choose
different input methods. In the editing area with the blinking
cursor, press the Direction key to move the cursor editing
location.
For the specific operations regarding these input methods,
refer to the following:
To Next Page
Loading...
