Nokia E66 - Number Dialing State; Dialing State; Receiving Incoming Call; Viewing Missed Call

31
G-TIDE E66 User Manual
4.1.2 Number Dialing State
Press any number key on the keypad to enter the dialing
state. At this time, the signal power indication and other icons
are still shown, and the blinking vertical line shows the cursor
location.
When the number to be dialed is entered, perform the
following operations:
Press the right soft key to delete the previous character
before the cursor.
Press the left soft key to search telephone number on the
phone book.
Press the dial key to dial the inputted number with SIM1 (dual
cards On or only SIM1 On).
Press the dial key to dial the inputted number with SIM2 (dual
cards On or only SIM2 On).
32
G-TIDE E66 User Manual
4.1.3 Dialing State
On the Dial interface, input a number string and then press
the Dial key to enter the Dial status. During dialing, the
screen will display the following: Signal and power indications;
if the number is not in the Phonebook, the number of the
receiver and SIM1 or SIM2 will be displayed; otherwise, the
name of the receiver and SIM1 or SIM2 will be displayed;
email; incoming call portrait and group.
During the dialing, press the Hang-up key to hang up the
current call.
4.1.4 Receiving Incoming Call
In the case of an incoming call, the mobile phone enters the
incoming call interface, and rings or vibrates according to the
current ring tone settings.
4.1.5 Viewing Missed Call
You can select the Call Record on the main menu interface,