Nokia Flexi Zone Pico - Transport

9 Transport
Transport protocol
FlexiZonePicoIndoorBTSusesIP/Ethernetasastandardtransportprotocol.Acopper
orwirelineEthernetisthestandardinterfaceinBTSunits.
Whenexternaltransportsolutions(suchaswirelessbackhaul,GPON,etc.)areused,
theycommunicatethroughtheEthernetconnectionontheBTSandthetechnologyused
istransparenttotheBTS.
FlexiZonePicoIndoorversionssupportsthefollowingnetworkinterfacesdependingon
thetechnology:
•
LTE
–
eNodeBtoMMEandServingSAEGatewaywithS1interface
–
eNodeBtoeNodeBwithX2interface
•
WCDMA
–
IUB(100/1000BASE-T)
–
RJ45(thephysicaltransportinterfaceconfiguration)
ThephysicaltransportinterfaceconfigurationavailableisRJ45.
Wireline Ethernet
FlexiZonePicoIndoorBTSBaseModuleRJ45socketsupports2GigabitEthernet
copperinterfaces100/1000Base-TaccordingIEEE802.3clause40.
FlexiZoneIndoorPicoBTSProductDescription Transport
Issue:01 DN09210454 31
 