Steps
1. For manual tuning, set mode to Local in the Operating Mode dropdown menu.
2. In the Tuning menu, choose WCDMA→Rx Calibration .
3. Click Start.
4. Select Band "WCDMA 2100".
5. Click Tune.
6. Setup the signal generator to correspond with the values on the,
Rx Calibration
pop-up window and click
OK.
Figure 40 Pop-up window for WCDMA2100
RM-179; RM-223
RF troubleshooting
Issue 1 COMPANY CONFIDENTIAL Page 4 –43
Copyright © 2007 Nokia. All rights reserved.
To Next Page
Loading...
