Nokia RM-243 Service Manual

Service tools
Product specific tools
The table below gives a short overview of service tools that can be used for testing, error analysis and repair
of product RM-243, refer to various concepts.
FS-63 Flash adapter
For flashing (also dead phones) with SS-46. RF testing and tuning, and
EM calibration on ATO level with SS-62 (mechanical locking concept),
CU-4 supported.
MJ-135 Module jig
MJ-135 is meant for troubleshooting, testing, tuning and flashing on
the engine level (CU-4 supported).
The jig includes an RF interface for GSM, WCDMA and Bluetooth.
RJ-176 Soldering jig
RJ-176 is a soldering jig used for soldering and as a rework jig for the
engine module.
RM-243
Service Tools and Service Concepts
Issue 1 COMPANY CONFIDENTIAL Page 2 –5
Copyright © 2007 Nokia. All rights reserved.

Nokia RM-243 Specifications

General

Brand	Nokia
Model	RM-243
Category	Handhelds
Language	English