ACCESS GATEWAY 1
Introduction 1
Introduction
About this Guide
This User Guide provides information and procedures that will enable system administrators to install, configure,
manage, and use the Access Gateway product successfully and efficiently. Use this guide to take full advantage of
the Access Gateway’s functionality and features.
Refer to Product Specifications on page 228 for a list of Access Gateway Products that this document supports.
The Nomadix Access Gateway hardware is configured and controlled by Nomadix Service Engine (NSE)
software. The NSE 7.4 is the last Software Release that supports the AG2300, AG3100, and AG5500. NSE 8.8
series is the last software release that supports the AG5600.
NSE 8.10 series software release supports the AG 2400, AG2500, AG5800, and AG 5900.
To Next Page
Loading...
