• For torque-control and continuous-rotation tools, the air pressure has a safety critical effect on
performance. Therefore, requirements for length and diameter of the hose shall be specified.
• Never carry an air tool by the hose.
PneuTorque
®
Specific Safety Instructions:
• This tool is intended for use with threaded fasteners. Other uses within the limits of the tool may be
appropriate. Please contact Norbar for guidance.
• The user (or the user’s employer) shall assess the specific risks that can be present as a result of each
use. This Operator’s Manual contains sufficient information for the end user to be able to perform an
initial risk assessment.
• Unexpected direction of drive square movement can cause a hazardous situation.
• Isolate the tool from all energy sources before changing or adjusting the drive square or socket.
Markings on Tool
Read and understand Operator’s Manual.
Unexpected tool movement due to reaction forces or breakage of drive square
or reaction bar may cause injuries.
There is a risk of crushing between the reaction bar and work piece.
Keep hands away from reaction bar.
Keep hands away from tool output.
To Next Page
Loading...