FEATURES AND FUNCTIONS
Replaceable Drive Square
To avoid internal damage (especially due to torque overload), the output drive square has been designed to
shear first. Tools are fitted with a drive square that can easily be replaced, alternative drive sizes are also
available.
Trigger
The trigger controls the flow of air, it must be held in to operate the tool. If the operator is not present the tool
will stop.
Forward / Reverse Collar
All tools can be used for tightening as well as releasing bolts. A collar for (Forward or clockwise) and
(Reverse or anti-clockwise) is located next to the trigger for easy access.
Gearbox
For safety the gearbox and handle can turn independently, so torque reaction is never
transmitted back to the operator.
Lifting Handle
The lifting handle allows comfortable and safe use of the tool.
The PT 11 – PT 18 are supplied with a lifting ring for easy handling.
In addition the PT 13 & PT 14 are supplied on a transporting trolley (Figure 1).
Low Operator Fatigue
The tools are quiet and do not operate with an impacting or pulsing action.
Optional Transducers
Electronic torque transducers can be directly fitted for precise torque monitoring.
FIGURE 1 – Transporting
Trolley
To Next Page
Loading...