nord NORDAC SK 5xxE Series - Page 52

NORDAC SK 5xxE Manual
52 Subject to technical alterations BU 0500 GB
Menu structure
The menu structure consists of various levels that are each arranged in a ring structure. The ENTER key
moves the menu on to the next level. Simultaneous operation of the SELECTION keys moves the menu back
a level.
Administrate 1
parameters
P1201 2
Copy - Source
P1202 2
Copy - Target
P1204 2
Load default values
P1203 2
Copy - Start
P1205 2
Delete memory
P0 2
Back
Parametrierung 1
Display 1
P1001 2
Bu s scan
P1002 2
FI selection
P1004 2
Values for display
P1003 2
Display mode
P1005 2
Standardisat. factor
P0 2
Ba ck
Options 1
P1301 2
Langua ge
P1302 2
Operating mode
P1304 2
Contrast
P1303 2
Automatic bus scan
P1305 2
Set password
P1306 2
Box password
P0
zurück
500E 1.1kW / 230V 1
Fi/Hz U/V I/A
45.0 190 2.4
ONLINE FI P1 R RUNNING
I1 I2 I3 I4 I5
1 - - - -
OK - - - -
90
P1307 2
Reset Boxparam.
P0 2
Back
P0
zurück
P1308 2
NORDAC p-box
Version 3.9 R0
Basic parameters 2
>ENTER< (to level 3.)
P0 2
Back
Frequency inverter-
menu structure
Æ Section 5
Parameterisation
Motor data 2
>ENTER< (to level 3.)
Operating displays 2
>ENTER< (t o le v e l 3 .)
P1101 2
Object selection
>Display< (P11xx), >Administer Parameters< (P12xx) and >Options< (P13xx) are purely ParameterBox-
parameters and do not have direct influence on frequency inverter parameters.
Via the menu
>Parametrerising< the frequency inverter structure can be accessed, if necessary after
selection of the object, if frequency inverter data sets are already stored in the ParameterBox.
The description of the frequency inverter parameters is in Section 5 of this description.