3.2 Technology unit overview
BU 0500 GB Subject to technical alterations 53
Select language, short description
The following steps must be carried out to change the menu language used in the ParameterBox display.
On switching on the ParameterBox for the first time, “German” or “English” will be offered for selection.
The selection is made by pressing the selection keys (arrow R/L) and confirming with the ENTER key.
In the following, “German” was selected on switching on for the first time. After this selection the following
displays should appear (varies depending upon output and options).
500E 1.1kW/230V 1
> NORDAC <
Frequenzumrichter
ONLINE FU P1 ESperre
Use the Selection keys or , to scroll
to the
Optionen menu
1
Optionen
>ENTER<
ONLINE FU P1 ESperre
P1301 2
Sprache
Deutsch ...
ONLINE FU P1 ESperre
then press >ENTER<
Using the Value key ,
select the required
language
... English
... Français
... Espanol
... Sverige
... Nederlands
After selection press >ENTER<
P1301 2
Language
English (p.e.)
ONLINE FU P1 READY
Press both Selection keys ( and )
simultaneously
1
Options
>ENTER<
ONLINE FU P1 READY
500E 1.1kW/230V 1
> NORDAC <
Frequency Inverter
ONLINE FU P1 READY
Press both Selection keys ( and )
simultaneously
Initial display
To Next Page
Loading...
