Environmental and safety notices
Environmental and safety notices for the DK and power supply requirements.
Note: The nRF52 DK must be powered by a PS1 class (IEC 62368-1) power supply with maximum
power less than 15 W.
Skilled persons
The nRF52 DK is intended for use only by skilled persons.
A skilled person is someone with relevant education or experience that enables them to identify potential
hazards and takes appropriate action to reduce the risk of injury to themselves and others.
Electrostatic Discharge
The nRF52 DK is susceptible to Electrostatic Discharge (ESD).
To avoid damage to your device, it should be used in an electrostatic free environment, such as a
laboratory.
4397_500
v
To Next Page
Loading...