7
STEP 3
Lift the left side (the side with pedals) of Bracket tubing combination (1), and open the Buckle (25) on the
bracket tubing combination (1). Insert Clip (17) of rowing rail (4) to the Revolving shaft (28) in direction
of the arrow. Put down the rowing rail (4) and match the Protecting cover (15) and the bottom revolving
shaft (28).
Noted: Please make sure that Clip (17) and protecting cover (15) have been installed on the correspond-
ing revolving shaft (28) before using.
Now your machine is ready for use.
To Next Page
Loading...
