Nordmann ES4 - Page 18

18
3.7.2.2 MultiPipe steam distribution system
H
B
The MultiPipe steam distribution system is used in ventilation ducts with a
short humidication distance (for the calculation of the humidication dis-
tance refer to chapter 5.4.2). When ordering an MultiPipe system the duct
dimension must be specied. Please consult the data in the following table.
MultiPipe Number of steam
connectors
Max. steam
capacity
in kg/h
1)
Duct dimensions
Width B
in mm
Height H
in mm
System 1 1 32 (23) 450-1500 4501650
System 2 2 65 (45) 450-2200 450-2200
1)
For duct widths <600 mm the value in brackets apply