EasyManua.ls Logo

Nordmann ES4 - Options

Nordmann ES4
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
3.6 Options
Nordmann ES4...
522
524
532
534
822
824
832
834
1532
1534
2362
2364
3262
3264
4564 6564
Remote operating and fault indication
PCB with relay contacts for the connection of remote
displays for “Operation”, “Steam”, “Fault” and “Service”.
1xRFI
Overpressure set
Kit for mounting the water cup to the unit cover when
operating the steam humidi ers in systems with a duct
air pressure of up to 10 kPa.
1xOPS
Terminals heating voltage
Separate terminals for systems where direct connection
of heating voltage to main contactor (standard version)
is not permitted by local regulations.
1x
S-THV
1x
M-THV
1x
L-THV
Steam hose connector with condensate trap 1xCT22 1xCT35 2xCT35
Cable glands (with metric thread) CG
Internal control voltage 1x
S-CVI
1x
M-CVI
1x
L-CVI
Transformer (400V/230V) 1xM-Trafo 1xL-Trafo
SC pump (lime management system)
The SC pump keeps the solved minerals in the water of
the steam cylinder in motion, in order to discharge them
with the automatic drain cycles.
1xSC
24 VDC power supply
24 VDC power supply for the external humidity sensor
1x24VDC
Nordmann ES4... (400 V/3~/50...60 Hz)
534 834 1534 2364 3264 4564 6564
Steam cylinder for low water conductivity
from 80 to 125 µS/cm
1x
534A-L
1x
834A-L
1x
1534A-L
1x
2364A-L
1x
3264A-L
1x
4564A-L
___

Table of Contents

Related product manuals