Introduction
2-1
Part 1073401_07
E 2021 Nordson Corporation
Section 2
Introduction
This manual describes the installation and use of the DuraBlue 4 L (D4L),
DuraBlue 10 L (D10L), and DuraBlue 16 L (D16L) adhesive melters. When
necessary, the reader is referred to the documentation supplied with other
Nordson products or products supplied by third parties.
With the exception of tank capacity, hose/applicator capacity, and exterior
appearance, all DuraBlue melters are function identically. To simplify the
presentation of information in this manual, depictions of the model D16L are
used generically throughout this manual to represent all DuraBlue melters.
To Next Page
Loading...
Need help?
General
