Nordson ProBlue P4 - Change History Log; Change History Log Examples

Installation
3-37
Part 1024496_06
 2014 Nordson Corporation
Table 3‐7 Change History Log
First Digit
Second Digit
Third and Fourth Digits
P
(Parameter)
-
Indicates the number of the parameter that was changed
S
(Set‐point)
Are used in conjunction with the LEDs on the component keys to indicate the
location and method of a set‐point temperature change.
When this LED
is on..
And the Fourth
Digit
Indicates..
The change
was to..
And the
Method of
Change was..
Tank Key 1 The tank Individual
Hose Key 1– 6 A single hose Individual
Gun Key 1– 6 A single gun Individual
All Keys 0 All components Global
Hose Key 0 All hoses
Global‐by‐
component
Gun Key 0 All guns
Global‐by‐
component
Change History Log Examples
Example 1:
Parameter 4 (ready delay) was changed.
Example 2:
If the LED on the gun key is on, then this display would
indicate that the global‐by‐component method was used to change the
temperature of the guns.