Security Code
You can set a 4-digit password to prevent job changes by unauthorized users. This password locks out the ability to
change dispense time, clear the shot count, or modify settings in Memory. The password is required to access the
Security screen. Unauthorized users get a Password Error message if an invalid password is used.
To select the functions to password protect
1. Press MENU.
2. Press the up / down arrows to highlight SECURITY, then press SELECT.
3. For rst time use, enter 0000 as the password and press ENTER (0000 is the default setting) or enter the current
password.
4. Press the up / down arrows to highlight the functions to protect (Memory, Shot Count, and Time).
5. Press SELECT to toggle between adding or deleting a check mark next to each function. To protect the function
from unauthorized changes, add the check mark. Delete the check mark to allow or change settings.
6. Press HOME to return to the Home screen.
To change the password
1. Press MENU.
2. Press the up / down arrows to highlight SECURITY, then press SELECT.
3. For rst time use, enter 0000 as the password and press ENTER (0000 is the default setting) or enter the current
password.
4. Press PASSWORD.
5. Press the left / right arrows to highlight the rst number.
6. Press the up / down arrows to set the number.
7. Repeat to adjust the other numbers in the 4-digit code.
8. Press ENTER. This puts you in the Security screen and automatically stores the new password.
9. Press HOME to return to the Home screen.
Menu Functions (continued)
Ultimus I–II High Precision Fluid Dispensers
23www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.
To Next Page
Loading...
