EasyManua.ls Logo

Nordson Ultimus II - Syringe Barrel Loading Alternatives; Atlas Filling System; Caulking Tube Filling Method; Luer-to-Luer Fitting for Syringes

Nordson Ultimus II
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Barrel Rack
P/N 7022411 for 3cc and 5cc barrels
P/N 7022429 for 10cc, 30cc, and 55cc
barrels
Filling the cartridge for the
Atlas Filling System.
Luer-to-luer tting
P/N 7012606 100 pack
P/N 7014838 1 piece
P/N 7022068 Atlas Filling System
Syringe Barrel Loading Alternatives
Nordson EFD offers productive alternatives to traditional syringe barrel loading methods. Here are a few suggestions
that can help keep your work area clean, save time, and reduce the chance of entrapped air in the uid.
Use the Atlas
Filling System, P/N 7022445 (12  oz). Pack the uid into a 2.5  oz, 6  oz, 12  oz, 20  oz, or
32  oz cartridge as shown. Then place the pre-lled cartridge into the barrel loader. Using air pressure, the barrel
loader lls the syringe barrel (with a piston installed) from the bottom up.
If the uid comes packed in a 300 ml (1/10 gallon) caulking type cartridge, use the EFD P/N 7022452 lling
system.
For fast, volumetric lling, the P/N 7022068 Atlas Filling System is an accurate, easy, and fast system for lling
syringe barrels.
If you receive frozen epoxies or other uids in medical type syringes with a manual plunger, request the EFD luer-
to-luer tting to transfer the material.
Contact an EFD uid application specialist for additional assistance.
P/N 7022445 (12  oz) Atlas Filling
System. Also available in 2.5, 6, 20,
and 32  oz.
P/N 7022452 for pre-lled 300mL
(1/10 gal) caulking tubes.
Ultimus I–II High Precision Fluid Dispensers
28 www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.

Related product manuals