To Next PageTo Next Page
Need help?Do you have a question about the Nordyne P5RD Series and is the answer not in the manual?
General| HSPF | Not Available |
|---|---|
| ENERGY STAR Certified | No |
| Cooling Capacity | 1.5 - 5 tons |
| Refrigerant | R-410A |
| Voltage (V) | 208/230 |
| Phase | 1 |
| Operating Temperature Range | Not Available |
| Cooling Capacity (BTU) | 18000-60000 |
| Stages | Single-Stage |
Critical warnings and safety precautions for operating and maintaining the air conditioner.
Detailed guidance on cooling, heating, turning off, and blower operation modes.
Recommendations for routine maintenance to ensure optimal performance and longevity.
Steps to identify and resolve common operational problems with the unit.
Essential safety warnings and guidelines specifically for installation personnel.
Covers general installation overview, site selection, and unit placement advice.
Provides foundational knowledge before beginning the installation process.
Pre-installation checks and considerations for a successful setup.
Guidelines for selecting the optimal and safe location for the outdoor unit.
Instructions for correctly installing the condensate drain fitting and trap.
Guidance on installing ductwork, including return and supply air fittings.
Details on attaching the supply duct collar and return air fittings to the unit.
Procedures for connecting the supply duct to the unit's outlet.
Procedures for connecting the return duct to the unit's inlet.
Steps for locating and installing the return air box and grille.
Instructions for connecting flexible ducts to the unit's supply and return openings.
Guidance on installing supply dampers for airflow control.
Essential information regarding electrical hookups, including safety and compliance.
A checklist to ensure all electrical requirements are met before connecting power.
Details on correct line voltage, polarity, and supply circuit requirements.
Critical instructions for ensuring proper electrical grounding of the unit.
Guidance on wiring thermostats and low-voltage control circuits.
Information on installing and wiring an optional outdoor thermostat for dual-stage heating.
Specific wiring instructions for connecting a cooling-only thermostat.
Specific wiring instructions for connecting a heat/cool thermostat.
Procedures for adjusting blower speed for optimal airflow and comfort.
Instructions for setting blower speed on standard motors (2, 2.5, 3 Ton).
Instructions for setting blower speed on high-efficiency motors (3.5, 4, 5 Ton).
A final checklist to ensure the unit is ready for operation.
Step-by-step instructions for safely starting the air conditioner.
How to set up and verify the cooling system's operation.
Explanation of the time-delay feature for compressor protection.
Instructions for operating the unit in emergency heat mode.
Guidance on checking and adjusting the system's refrigerant charge.
Specific procedures for charging an R-410A unit in AC mode.
Diagrams and measurements detailing the unit's physical size.
A table listing physical specifications for different P5RD models.
Key maintenance activities to perform regularly on the unit.
Explanations of the operational purpose of various unit components.
Description of the high-pressure safety switch function.
Description of the low-pressure safety switch function.
Information on ordering replacement parts for the unit.
Electrical schematic for units equipped with an ECM blower motor.
Electrical schematic for units equipped with a PSC blower motor.
Tables providing refrigerant pressures and temperatures for various operating conditions.
Specific charging data for 2-ton P5RD models.
Specific charging data for 2.5-ton P5RD models.
Specific charging data for 3-ton P5RD models.
Specific charging data for 3.5-ton P5RD models.
Specific charging data for 4-ton P5RD models.
Specific charging data for 5-ton P5RD models.
A final checklist to ensure all installation and performance parameters are met.
