32 I Administration
Explanation of System Speed Dial Overview
From the I-1 heading, press ~ to cause
the IShow set:-
I sub-heading to appear. You can enter
the two-digit Speed Dial code of the Speed Dial number you wish to 1
see or press Next to see the entry (if there is one) for the lowest
System Speed Dial code: number 01. Pressing [Next1 repeatedly ‘:
allows you to scroll forward through the list, moving up by one
number with each press. You can scan the list as far as #70 if you
wish. From #70, pressing (Next twice moves you to the next
,
heading:1 2. Names
1 When the display shows any
Speed Dial code number, pressing ~ scrolls backward
through the list. When a particular code is shown on the display,
you can enter a telephone number or change the existing entry by
pressing the (CHANGE( display button, then entering the desired
digits or symbols from the dialpad.
Notes on System Speed Dial
The maximum length of a telephone number stored as a. System
Speed Dial code is 16
digits.
The method for using both System and Personal Speed Dial codes
is the same. The same Speed Dial button can access both System
and Personal Speed Dial numbers, but the code used is different
for the two types of Speed Dial features: System Speed Dial codes
range from 01 to 70, Personal Speed Dial codes range from
71 to 94.
Personal Speed Dial numbers are programmed at individual
telephones within your Norstar system. They can not be
programmed using Norstar Administration.
System Coordinator Guide
To Next Page
