r.-> ,
‘~.,.‘.;;
.‘I .,/ _,
..I
:
.
..‘i :..
, :,. .-.r.
I..
..,
..:: . .
.,
23
Norstar Administration
Entering Administration
This chapter of the Guide will help you to understand the variety of
features and settings available through Norstar Administration
programming. The detailed descriptions and step-by-step
instructions included in each of the following sections will enable
you to be completely at ease with administering the Norstar
System.
Read each section carefully in order to learn how the various
features work together to make your office telephone system highly
efficient.
To Enter Administration:
,
1. Release all calls on your M7324 or M7310 telephone.
Indicators for calls on other telephones stay ON.
2. Enter the Administration code:
pFiiEq~I*Il*I~~~~pI
which is also
3. If the display changes to 1
Password :
I, enter
the Administration password. The password does not
appear on the display as you enter it.
If the proper password is entered
(or no password is
required) the display shows
1 Sys speed d i R I
1 and
three triangular indicators ) appear on the liquid crystal
display (LCD) between the rows of buttons.
If an incorrect password is entered,
no change occurs
on the display. Check the password. Press the m
display button and re-enter the password. The display
shouldshow
1.5~5 speed dial
System Coordinator Guide
i. -
To Next Page
