.s :-
:’
-’ : . .
,\
.! :
.
.-;:,
Notes on Overrides
The maximum length of an Override sequence is 14 characters,
including digits and asterisks.
The maximum number of Overrides which can be programmed for
a system is 10. These can be turned ON and OFF for individual
lines and telephones in the system.
The universal Override for all Restrictions is a string of 14 asterisks
* When this Override is applied to a line or telephone, it
bypasses all digits in any Restriction on that line or telephone.
If the Overrides in your system are not allowing certain types of
calls as intended, look for the following conditions:
The Overrides may not be applied to all of the necessary lines
or sets.
A certain telephone number may bypass one Restriction
because of an Override, only to be prevented by another -
Restriction that also needs an Override.
A telephone number may bypass a Restriction on a telephone
set, but be prevented by a Restriction on a line.
Restrictions can also be overridden using Restriction Passwords,
which you can activate and change under the
8. Passwords
1 section of Norstar Administration. If
activated, these passwords will override all Restrictions applied to
any lines or telephones within your Norstar office system.
Administration /
61
System Coordinator Guide
i.-
To Next Page
Loading...
