Installing an SFP 21
4
Remove the dust cover from the optical bore and insert the fiber
optic connector.
—End—
Procedure job aid: locking and extractor mechanisms
Depending on the transceiver manufacturer, your SFP transceiver can have
various types of locking/extractor mechanisms.
The following figure shows typical locking/extractor mechanisms used on
SFP transceivers; other locking/extractor mechanisms exist, although they
are not shown here.
SFP locking and extractor mechanisms: MT-RJ, dual LC
Nortel Ethernet Routing Switch 5500 Series
Installation — SFPs
NN47200-302 03.01 Standard
5.1
27 August 2007
Copyright © 2007, Nortel Networks
.
To Next Page
