110 AFP-200 Instruction PN 15511:F2 10/11/99
F8
Prnt Line Term=<CR><LF> Prnt Block Term=<CR> Secondary Recv=On
F9
Page Edit=Off WPRT Intensity=Dim WPRT Reverse=Off
WPRT Underline=Off WPRT Blink=Off Display NV Label=Off
Save Labels=On Status Line=Off
F10 and F11
Note: No functions in setup groups F10 and F11 will affect communications with the control panel.
F12
The function keys on the CRT-2 should be programmed as follows:
F1 ~A F2 ~B F3 ~C F4 ~D F5 ~E F6 ~F
F7 ~G F8 ~H F9 ~I F10 ~J F11 ~K F12 ~L
F13 ~M F14 ~N F15 ~O F16 ~P Shift F13 ~Q
Upon the completion of programming of all the setup groups, press the Pause key, then press Y (yes) to save all
changes.
Upload/Download
The EIA-232 port of the control panel may also be used to upload and download the operating program of the
control panel. The operation of the upload/download software (PK-200) is described in the PK-200 Off Line
Programming Utility manual. Download operations which change the basic program of the control panel must
be done with responsible service personnel in attendance at the control panel. After a program is downloaded,
the control panel must be tested is accordance with NFPA 72-1993.
To Next Page
Loading...
