Panel Operation
40 AFP-2800/2802 Manual – P/N 11249 11-Mar-08
6.3.3.9 SERVICE MENU – LIST – LIST – AZF
This screen will display all conventional alarm zones (AZF’s) detected on the system. Zones which have been
allocated zone numbers will display the zone number, the physical point number (Ring/Module/I/O format), and
the zone description.
Unallocated zones will default to Z0 for the zone number, and the description will be the type of field module to
which the zone belongs. i.e. (AZM8 etc.)
00.001.Z01 (Z0 ) PANEL BREAK GLASS
00.001.Z01 (Z0 ) PANEL DOOR OPEN x
01.001.Z01 (Z4 ) CARPARK L4
01.001.Z02 (Z3 ) CARPARK L3
01.001.Z03 (Z2 ) CARPARK L2
01.001.Z04 (Z1 ) CARPARK L1 I
01.001.Z05 (Z1 ) LOBBY
01.001.Z06 (Z0 ) (AZM8)
01.001.Z07 (Z0 ) (AZM8)
01.001.Z08 (Z0 ) (AZM8)
01.002.Z01 (Z12 ) LEVEL 1 CORRIDOR
01.002.Z02 (Z13 ) LEVEL 2 CORRIDOR
01.002.Z03 (Z212) ROOM 212
01.002.Z04 (Z213) ROOM 213
01.002.Z05 (Z214) ROOM 214
01.002.Z06 (Z10 ) LIFT MOTOR ROOM F
01.002.Z07 (Z0 ) (AZM8)
01.002.Z08 (Z0 ) (AZM8)
ALARM ZONE LIST
20 JULY 2002 14:44:37
CHANGETESTDOWNUP BACK
USE UP/DOWN BUTTONS TO SELECT A ZONE:
A = 0
F = 1
I = 1
N = 1
DAY MODE
Actions:
Use the UP and DOWN buttons to scroll through
AZF points.
When highlighting an AZF input point, pressing the
TEST button will take you into the test menu for
AZF’s (refer page 68) providing the options for an
alarm and fault test.
Pressing the CHANGE button will take you to the
modify point screen (refer to page 56)
Pressing the BACK button will return you back to
the service menu
In the above example, the following abbreviations of STATUS apply.
Status
Abbreviation
Meaning
A Alarm
I Isolated
F Fault
X Activated
Note: You can also use the arrow keys, the Page Up and Page Dn keys on an external keyboard for scrolling
functions.
To Next Page
Loading...
Need help?
General
