Specifications & Approvals
AFP-2800/2802 Manual – P/N 11249 11-Mar-08 7
3 SPECIFICATIONS & APPROVALS
3.1 GENERAL SPECIFICATIONS (SUBJECT TO CHANGE WITHOUT NOTICE):
Cabinet Zinc Sealed Steel 1.6mm
Powder Coated
Hinged Inner Door
Hinged Outer Door
AC Operational Voltage 240 VAC 50Hz ± 10% Australian Version
Internal Power Supplies 24 VDC (nom) 3.0A (2.6 – 11.7 AMP optional)
Primary Microprocessor MC68EC000
Memory Type Non-volatile 16Mbit Flash; 1 Mbyte SRAM
Liquid Crystal Display LED Backlit 1/4 VGA graphical
Environmental Dry cold/heat: -10 °C to +55 °C
Damp heat: +40 °C @ 93% Relative Humidity.
IP Rating IP 51
3.2 APPROVALS INFORMATION
Manufacturer: Notifier Inertia
7 Columbia Court
Norwest Business Park
NSW 2153 Australia
Phone: +61-2-9899-4155
Fax: +61-2-9899-4156
Product Name: Notifier Inertia AFP-2800 (formerly Notifier Inertia DFP-2800)
Approved to: AS4428.1 1999
Approval Report #: XF1769/R2 - Scientific Services Laboratory
SSL ActivFire Listing No: AFP-1459
Approved to: NZS 4512:2003
Approval Report #: 05-527699.00 - Opus International Consultants Limited, Central Laboratories
Panel Serial #: ________________________
Date of Manufacture: ________________________
WARNING: This equipment may radiate radio frequency energy. It may also be affected by radio frequency energy
and, if not installed and operated in accordance with the manufacturers instructions, may cause
interference to radio communications. It has been tested and found to comply with the Class A radiated
and conducted EMI requirements of AS/NZ 3548:1995 (including Amendments 1 & 2) as well as the EMI
susceptibility requirements of Clause C3.5 in AS4428.0:1997.
CAUTION: Radio communication devices should not be used in the vicinity of fire panels or associated ancillary
devices and systems.
To Next Page
Loading...
Need help?
General
