Notifier AFP-2800 User Manual

Panel Operation
82 AFP-2800/2802 Manual – P/N 11249 11-Mar-08
6.3.9.3 SERVICE MENU – NETWORK – NODE
This menu allows you to set the network address and send/receive network parameters for the panel.
ENTER NODE NUMBER 0-240 >
TO DISABLE NETWORKING ON THIS FIP ENTER ‘0’
WARNING!! CHANGING THE NODE NUMBER CAN ALTER
NETWORK BEHAVIOUR AND SCRIPT PROCESSING.
MAKE SURE THE NETWORK CONFIGURATION IS
UPDATED TO REFLECT THIS CHANGE.
NETWORK NODE MENU
CURRENT NODE NO IS’0’
20 JULY 2002 14:44:37
A = 0
F = 0
I = 0
N = 1
DAY MODE
ESC ENTER BACKSP
Actions:
 Follow the on screen prompts to enter a node
number. To remove the panel from the network,
enter Node 0.
 If a non-zero node number is entered, you will be
further prompted to enter if you want the panel to
transmit events to the rest of the network YES or
to receive network events only without transmitting
them (mimic panel mode) NO .
6.3.9.4 SERVICE MENU – NETWORK – RECEIVE
This menu is used to select which other nodes the panel will receive events from.
ENTER NODE NUMBER 0-240 >
NETWORK SETUP MENU
20 JULY 2002 14:44:37
A = 0
F = 0
I = 0
N = 1
DAY MODE
ESC ENTER BACKSP
Actions:
 Enter the node number of the panel from which
the local node shall receive events.

Notifier AFP-2800 Specifications

General

Brand	Notifier
Model	AFP-2800
Category	Control Panel
Language	English