AFP-3030 Operations Manual — P/N DOC-01-039:A 26/11/2015 58
Print Programming Menu Screen (2) Printing Reports
Soft Keys
NETWORK PARAMETERS: Press to print node number, node label, Channel A and B threshold,
network style. The report looks like this:
SETTINGS: Press to print broadcast time and block acknowledge. The report looks like this:
TIMERS: Press to print timer values for Auto Silence, Silence Inhibit, AC Fail Delay time and
whether it has been enabled, Proprietary Reminder, and Remote Reminder timers. The report looks
like this:
LCD DISPLAY: Press to print information about backlight handling during fire alarm and back-
light intensity. The report looks like this:
5.3 Print Programming Menu Screen (2)
The second PRINT PROGRAMMING MENU screen displays when MORE is pressed at the first
PRINT PROGRAMMING MENU screen:
Figure 5.3 Print Programming Screen
******NETWORK PARAMETERS********************************************************
NODE:N124
NODE LABEL: LAKEVILLE GENERAL HOSPITAL
CH A. THRESHOLD: HIGH CH B. THRESHOLD: HIGH
IP ACCESS:OFF
********************************************************************************
******PANEL SETTINGS************************************************************
LOCAL CONTROL: NO FAULT REMINDER: YES
PIEZO: ON POWER MANAGEMENT MODE: OFF
DISPLAY ADDRESS: YES
LCM LOCAL MODE: NO
RAPID ALL CALL: NO
SILENCEABLE WATERFLOW: NO
MN PRIORITY OVER FIRE: YES
SILENCE CONFIGURATION: AUDIBLE
********************************************************************************
******PANEL TIMERS**************************************************************
VERIFY TIME: 30 VERIFY=PREALARM: NO
MAXIMUM VERIFICATION COUNT: 00
AC FAIL DELAY: 8 HOURS
SILENCE INHIBIT: 00:00
AUTO SILENCE: 10 MINUTES
OUTPUT DELAY TIME: 01:00
********************************************************************************
******LCD DISPLAY***************************************************************
LCD INTENSITY: 040 BACKLIGHT: ON
********************************************************************************
PRINT PROGRAMMING MENU
SUPERVISION EVENT LOGGING
CUSTOM ACTION MESSAGES
BACK