General Safety
1. Read the safety and operating instructions before
operating the analyzer.
2. Retain the safety and operating instructions for
future reference.
3. Observe all warnings on the analyzer and in the
operating instructions.
4. Follow all operating and use instructions.
5. Do not use the analyzer near water, for example
near a sink, etc.
6. Use only with a cart or stand that is recommended
by the manufacturer.
The analyzer and cart combination should be
used with care. Quick stops, excessive force, and
uneven surfaces may cause the analyzer and cart
combination to overturn.
7. Place the analyzer so that its location or position
does not interfere with its proper ventilation.
8. Place the analyzer away from heat sources.
9. Connect the analyzer to a power supply only of
the type described in the operating instructions or
marked on the analyzer.
10. Do not defeat the safety purpose of the polarized
or grounding type plug.
11. Route power cords so that they are not likely to
be walked on or pinched by items placed upon or
against them, paying particular attention to cords at
plugs, power sockets, and at the point where they
exit from the analyzer.
12. The analyzer should be cleaned only as
recommended by the manufacturer.
13. Take care not to let objects or liquids fall into the
analyzer.
14. The analyzer should be serviced by qualied service
personnel.
15. Do not attempt to service the analyzer beyond that
described in the operating instructions. All other
servicing should be referred to qualied service
personnel.
To Next Page
Loading...
Need help?
General
