2. Select the desired Test Panel from the drop-down list
or select one or more analytes to create a Custom
Panel.
Figure 3.2 Ready Screen: Container and Panel Drop-down List
3. Press Start icon to begin the analysis.
4. If prompted, enter
all Required
Information
and press Start
once
more to begin the
analysis.
Figure 3.3 Sample Information Screen
5. Prepare the sample for analysis (mix well) then
position the sample
over the probe
and press Aspirate
. The sample
probe will retract
automatically once
sufficient sample
has been aspirated
into the analyzer.
Figure 3.4 Syringe Sample without Luer
To Next Page
Loading...
Need help?
General
