NOTE:
The sample will remain on screen until all Required
elds have been entered. The analysis can be cancelled
by pressing the X icon
but results will not be
printed or transmitted.
3.1.3 Analyzing Sample from a Blood Collection Tube
From the Home screen, login if you are prompted to login.
1. Press the Login icon to log into the analyzer.
2. Enter or scan your Operator ID then press .
3. If required, enter or scan your Password then press
.
Figure 3.11 Operator ID Screen and Operator Password Screen
If login is not required or after logging into the analyzer:
1. Select the blood collection tube icon from
the container drop-down list.
2. Select the desired Test Panel from the drop-down list
or select one or more analytes to create a Custom
Panel.
To Next Page
Loading...
