6. Enter any Required or Optional information while
the analysis is running.
NOTE:
The sample will remain on screen until all Required
elds have been
entered. The
analysis can be
cancelled by
pressing the X icon
but results
will not be printed
or transmitted.
Figure 3.15 Sample Information Screen
3.1.4 Analyzing Sample from a Capillary Tube
From the Home screen, login if you are prompted to login.
1. Press the Login icon to log into the analyzer.
2. Enter or scan your Operator ID then press .
3. If required, enter or scan your Password then press
.
Figure 3.16 Operator ID Screen and Operator Password Screen
If login is not required or after logging into the analyzer:
1. Select the capillary icon from the container
drop-down list.
To Next Page
Loading...
Need help?
General
