3.2.2 Analyzing External Quality Control Samples
From the Home screen, login if you are prompted to login.
1. Press the Login icon to log into the analyzer.
2. Enter or scan your Operator ID then press .
3. If required, enter or scan your Password then press
.
Figure 3.22 Operator ID Screen and Operator Password Screen
If login is not required or after logging into the analyzer:
1.
From the Home Screen, press the QC button .
2. Press the Analyze QC button .
Figure 3.23 Quality Control Screens
3. From the drop-down list select the External Control
Level to be analyzed.
4. Select the lot number of the External Control to be
analyzed.
5. Enter a QC Comment if desired.
To Next Page
