ML0044B December 1, 2017 - 134 - Copyright 2017 Bitronics, LLC
Added screw torque spec (ground bond)
in section 1.3 table under Physical/Size
description. Section 1.5 revision for the
following: New Directives 2014/30/EU
(EMCD) and 2014/35/EU (LVD), AC
Power Line Conducted Emissions, AC
Dips & Interruptions, EFT, and Surge;
Revised applicable dates pertaining to
Surge and Conducted Disturbances
standards.
Removed Ethernet port from surge test
under Section 1.5.
Changed Power Supply Installation
Category information on page 12 to
CAT II
dded new Declaration of Conformit
C 10/18/16 Added information on new serial port
and digital I/O options, additional
measurements
E. DeMicco
D 12/16/16 Added information on serial ports and
RS485 diagrams; updated section 4.4;
reference changes in section 1.6;
updated information in section 3.8
E. DeMicco
E 5/22/17 Updated firmware version information,
corrected reference in section 1.6
E. DeMicco
F 8/17/17 Removed information on indicator LEDs
on pa
e 21 listed in error.
E. DeMicco
G 9/25/17 Added/updated information on 3-phase
average voltages and currents;
corrected information on allowable
password characte
E. DeMicco
H 12/1/17
dded information on trend recorde
E. DeMicco