14
ML0044B December 1, 2017 Copyright 2017 Bitronics, LLC
AUX PWR (Universal – Hi Range Power Supply) - Power Supply Input (Auxiliary
Voltage) – terminals L1(+) and L2(-)
Installation Category/Overvoltage Category (Auxiliary Power Supply) – CAT II
Nominal: 48-250V dc, 69-240V ac (50/60Hz)
Operating Range: 37-300V dc, 55-275V ac (45-65Hz)
Burden: 8W max, 24VA max
Overcurrent protection (Required) : Refer to section 2.4
Optional Display (PPX II-TD): 3 lines of 5 digits, Red LED, 0.56” High
1 line 8-character alphanumeric, Red LED, 0.20” High
Display Interface (PPX II-TD): 4 buttons
Display Communication: RS232, full duplex
19200 baud
8 bit, No parity, 1 stop bit
Display Distance: 30 ft. (9m) RS232
Display Addressability: 1 Display Address
Display Power Supply: DC power is derived from P1 Display port jack (RJ11)
located on PPX II.
Nominal: 5Vdc, powered from PPX II Display Port
Operating Range: 5-15Vdc
Current: 400mA max
To Next Page
Loading...
