LUBRICATION
GREASING PROCEDURE
Manual greasing for hammers without an Auto Lube System.
1. Place the hammer in a vertical position, applying enough downforce to push the tool
up into the hammer.
2. Turn the machine off.
3. Grease the hammer until grease begins to come out around the tool (HH) and lower
bushing (see arrow).
4. Grease hammer at least once an hour. See “CORRECT FUNCTION OF
GREASING AND GREASE INTERVALS” for a more exact greasing procedure.
NOTE: USE A GOOD QUALITY EP #2 LITHIUM BASED GREASE WITH WEAR
INHIBITING ADDITIVES, SEE PAGES 20 through 21.
To Next Page
Loading...
