NPK E Series - Types and Applications of Tool; Standard Tools; Accessory Tools

- 53 -
TYPES AND APPLICATIONS OF TOOL
STANDARD TOOLS
DEMOLITION TOOL
SHAPE
APPLICATIONS
CHISEL (FX)
The crosscut (FX) tool
cuts at right angle, or
crosswise, to the stick and
boom of the excavator.
• Trenching
• Cutting casting gates
• Breaking oversize
• General demolition
MOIL (P)
• Concrete breaking
• Highway construction
• General demolition
BLUNT (E)
• Secondary breaking
• Breaking oversize
• Slag removal
OPTIONAL TOOL
CORE (PC)
for E207
• Concrete breaking
• Highway construction
• General demolition
ACCESSORY TOOLS
SPECIALTY TOOL
SHAPE
APPLICATIONS
FROST CUTTER
Cross cut (SX), In Line (SY)
for E201 thru E205
• Edge of trenching
• Frost cutting
ADAPTER TOOL
for E201 thru E205
• For attachments listed
below
TAMPER PLATE (E201 to E205)
(use with adapter tool)
9-1/2” x 9-1/2” for E201
12” x 12” for E202, E203
16” x 16” for E204, E205
• Soil compaction
• Driving sheeting
POST and PIPE DRIVER
(use with adapter tool)
for E201 thru E205
• Driving guard rails
• Driving fence posts
TOOLS FROM H SERIES HAMMERS WILL NOT ALWAYS FIT
E SERIES! CHECK PART NUMBERS!