NPK E Series - Carrier Machine Compatibility

- 6 -
CARRIER MACHINE COMPATIBILITY
These carrier weight ranges are intended as a guideline only. Other factors, such as
stick length, counterweights, undercarriage, etc., must be taken into consideration.
Mounting a HAMMER that is too heavy for the carrier machine
can be dangerous and damage the machine. Verify carrier
stability with hammer before transport or operation.
Mounting a HAMMER that is too small for the carrier machine can damage the
HAMMER, cause tool breakage and void Warranties. Please consult NPK Engineering
for specific detailed information.
CARRIER WEIGHT - lbs. (kg)
HAMMER
MOUNTING
RECOMMENDED RANGE
MODEL
STYLE
lb
(kg)
E200
Excavator
2,200 - 4,400
(1,000 - 2,000)
Skid Steer
2,400 - 3,500
(1,100 - 1,600)
E201
Excavator
2,800 - 5,500
(1,300 - 2,500)
Skid Steer
3,000 - 5,500
(1,350 - 2,500)
E202
Excavator
5,400 - 9,000
(2,450 - 4,100)
Skid Steer
5,000 - 7,500
(2,300 - 3,400)
E203
Excavator
6,600 - 12,000
(3,000 - 5,500)
Skid Steer
6,000 - 9,000
(2,700 - 4,100)
E204
Excavator
8,800 - 15,000
(4,000 - 7,000)
Skid Steer
8,000 - 14,000
(3,600 - 6,400)
Backhoe
9,000 - 15,000
(4,100 - 7,000)
E205
Excavator
13,000 - 22,000
(6,000 - 10,000)
Backhoe
13,000 - 20,000
(6,000 - 9,000)
E207
Excavator
22,000 - 31,000
(10,000 - 14,000)
Backhoe
20,000 - 25,000
(9,000 - 11,500)
*Specifications are subject to change without notice.