NPK E Series - Page 40

- 39 -
OPERATION
OPERATING TECHNIQUES & PRECAUTIONS
DO NOT OPERATE HAMMER
UNDERWATER
Do not allow parts, other than the
tool, to go below water level (115).
Underwater operation will damage
the hammer and allow water to enter
the hydraulic system. The hammer
can be modified for underwater
operation - contact the NPK Dealer
for more information.
DO NOT SUBMERGE A HOT
TOOL IN WATER!
The tip of the tool (HH) may be hot
from operation. Submerging below
water level (115) can cause the tip of
the tool (HH) to become brittle and
break prematurely.
DO NOT ALLOW THE
HAMMER TOOL TO HIT THE
BOOM
Use caution when tucking the hammer
in tight to the boom for transportation.