10
National Rejectors, Inc. GmbH, Buxtehude
SRG – Internal HENRI functions
s
a f e T y i n s T r u c T i o n s
Protecting yourself and equipment
The service tool may only be used, if the device and connecting
cable are not damaged.
Only use the service tool according to proper use. Under no cir-
cumstances can the manufacturer be held liable for any damage
or loss resulting from improper use of the device.
PleasemakesurethataftereachcongurationofanNRIchanger
the label of the changer has been adapted to the new settings
or the new settings are written down in another way for the
workshop and the installation place.
The coin validator, changer and HENRI PCBs are tted with
components which may be damaged beyond repair by electro-
static discharge. Please observe the handling instructions for
components exposed to the risk of electrostatic discharge.
Do not alter the construction of the device.
Keep water and other liquids away from the device.
If the device is no longer required, please dispose of it cor-
rectly.
Wereservetherighttomaketechnicalmodicationstothedevice
which are not covered by these instructions!
To Next Page
Loading...