To Next Page

To Previous Page

Operation

The VS-5E Series becomes operative when the following 5 operations are performed.

Item Description

1) Switch power ON

2) Set the sensor rotation direction Designate the direction in the angular value increases.

3) Set the origin point

Move the machine to the origin point position, then designate that

position as “zero” at the Controller.

4) Set the switch outputs Set the Switch ON/OFF positions.

5) Run

8-1.

Power ON

The VS-5E Series is not equipped with a power switch. Power ON/OFF switching is executed by an

external switch.

Note: Before switching the power ON, be sure that the wiring is correct, and the terminals are secure.

●C-2●

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Questions and Answers:

Need help?

Do you have a question about the NSD Varicam VS-5E Series and is the answer not in the manual?

NSD Varicam VS-5E Series Specifications

General