NSD Varicam VS-5E Series - Current Position Value Setting

9-1-4.
Protected Switch Function
Set the key-switch to the INIT position.
Designate Initial No. “96”.
９６
   SWITCH
Designate the password as “777”.
   POSITION
Press the [SET] key.
When the setting is designated, the value shown at the DOG
display will change from 0 to 1, indicating that the Protected
Switch function is operative.
１
１１
１
２
２２
２
┼
─
In order to select Initial No. “96”, first designate “97”,then
execute the procedure shown below.
９７
PROGRAMSWITCH DOG



┼
─
┼
─
While pressing the Dog [-] key,
also press the Switch [-] key.
The displayed No. will change to
“96”.
４
４４
４
SET
SETSET
SET
３
３３
３
７７７
┼
─
┼
─
SET
TEACH
CLEAR
INIT
RUN
●C-11●
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com