NSD VARICAM VS-5F-1 - Page 102

92
OPERATION 10. HOW TO USE APPLIED FUNCTIONS (OPERATION MODE)
10-2. Monitor Contents
(1) Monitoring the current position value
The current position value and ON / OFF state of the switch output can be check during the operation.
Name
Descriptions
① POSITION display Displays the current position value.
② PROGRAM display
Displays selecting the program number.
(VS-5F and VS-5F-1 are not available this function.)
③
SW / PRM key
Selects the switch number that is monitored on DOG display area.
④
SW / PRM display
Displays the switch number which is selected by SW /PRM key.
⑤ DOG display Monitors the output state of the switch number which is selected by SW / PRM key.
ON : OFF :
⑥
MODE indicator
RUN LED is ON: Indicates the operation (RUN) mode.
⑦
RDY indicator
If there is no error, this indicator will turn ON when selecting the operation (RUN) mode.
This indicator is same condition as “System ready output signal” of the output connector.
⑥ ② ④ ⑦ ⑤ ①
③