To Next PageTo Next PageWhy does my NSK Medical Equipment show a 'System Error'?
If the NSK Medical Equipment shows a 'System Error', it may be due to a memory failure, erroneous memory, or a USB flash drive other than the type stipulated connected. In any of these cases, you should request a repair.
What to do if NSK Surgic Pro+ displays 'Motor Rotation Failure Error'?
If the NSK Medical Equipment displays a 'Motor Rotation Failure Error', it could be due to handpiece attachment failure. Ensure the chuck is securely closed. If the error persists, it may indicate a motor failure, in which case you should request a repair.
Why does my NSK Medical Equipment display 'Control Unit Interior Over-heating Error'?
If the NSK Medical Equipment displays a 'Control Unit Interior Over-heating Error', it may be due to overheating from extended use under heavy load. Allow the unit to cool down before use. It could also be caused by operating the unit under extremely high temperatures; ensure the periphery of the main Control Unit is well-ventilated. If the error persists, request a repair.
What to do if NSK Surgic Pro+ shows a 'Breaking Error'?
If the NSK Medical Equipment gives a 'Breaking Error', it may be due to abnormal voltage in the start/stop switch circuit. If rotation and stop are repeated frequently, a circuit limiting acceleration may activate. Wait a few seconds before using again. If the error persists, it may indicate a failure in the start/stop switches circuit, and you should request a repair.
What to do if NSK Surgic Pro+ Medical Equipment shows 'Excessive Current Detected'?
If the NSK Medical Equipment displays 'Excessive Current Detected', it could be due to extended use under heavy load, potentially causing insufficient electrical contact. Ensure the Motor Cord is securely re-connected. If the error persists, a short circuit in the motor may be the cause, and you should request a repair.
What to do if NSK Surgic Pro+ Medical Equipment indicates 'Pump excess voltage'?
If the NSK Medical Equipment indicates 'Pump excess voltage', first check the irrigation tube to ensure it is correctly fitted and not loading the pump roller. If an error code is still displayed when the irrigation tube is normal, request a repair.
What to do if there is ingress of water into the motor of NSK Medical Equipment?
If water has entered the motor of your NSK Medical Equipment, request a repair. Make sure to put a Protection Plug when Thermo-disinfecting it.
General| Type | Surgical Micromotor System |
|---|---|
| Max. Pump Output | 75 mL/min |
| Motor Speed | 200 to 40, 000 min⁻¹ |
| Torque Range | 5.0 - 80 Ncm |
| Power Supply | AC 120 V or 230 V 50/60 Hz |
| Programs | 8 |
| Display | LCD |
| RPM Range | 200 - 40, 000 min⁻¹ |
| Torque | 5-80 Ncm |
| Autoclavable | Yes |
| Compatible with | Various NSK Handpieces |
Explains the function and operation of each key on the control unit panel.
Describes the various indicators and information displayed on the control unit's LCD screen.
Details the components and operational functions of the foot control unit.
Provides instructions for correctly connecting the motor cord to the control unit.
Guides on how to properly attach the handpiece to the micromotor.
Instructions for connecting the foot control cable to the control unit.
Steps for connecting the AC power cord to the control unit for power supply.
Details the procedure for correctly installing the irrigation tube system.
Instructions for attaching the coolant solution hanger post to the control unit.
Step-by-step guide for inserting the irrigation tube into the coolant bottle.
Explains how to check the compatibility of irrigation nozzles with various drills.
Information on attaching different types of irrigation nozzles to handpieces.
Instructions for securing the tube holder to the motor cord for strain relief.
Guidance on inserting and recognizing a USB flash drive for data storage.
Instructions for setting the system's clock and date for accurate data logging.
Describes how to adjust the light level for optic motors.
Explains how to change the volume for operation and warning sounds.
Details the procedure for restoring the device to its original factory default settings.
Guides on how to program and store up to 8 different operational programs.
Explains how to skip specific program numbers when switching programs.
Information on programming and managing up to 8 different implant systems.
Details the process for calibrating the handpiece and motor for accurate operation.
Instructions for performing standard operations using the surgical unit.
Explains how to use the USB function for data storage and retrieval.
Procedures for cleaning and maintaining the control unit and foot control.
Guidelines for cleaning and disinfecting the handpiece and motor.
