NU Aqua Efficiency Series - Alkaline & UV System Connections; Connecting Tubing for Both Filters; Connecting Power for UV and RO; System Power-Up Notice

17
Alkaline & UV System Connections
Notice: Do not plug reverse osmosis
system into wall outlet yet
IN
OUT
POWER CORD
OUTLETINLET
1. Connect the 3/8” tubing coming from the leak detector into the INPUT connection on the back of the
reverse osmosis system. Secure the tubing in place with a retaining clip.
2. Connect 1/4” tubing coming from the drain saddle into the DRAIN connection on the back of the reverse
osmosis system. Secure the tubing in place with a retaining clip.
3. Connect the blue 1/4” tubing to the PURE water connection on the back of the reverse osmosis system.
Connect the other end of the blue 1/4“ tubing to the INLET of the alkaline filter. Secure both connections
with a retaining clip.
4. Connect the blue 1/4” tubing to the OUTLET of the alkaline filter. Connect the other end of the 1/4”
tubing to the IN connection of the UV filter. Secure both connections with a retaining clip.
5. Connect the 1/4" tubing to the OUT connection on the UV filter. Connect the outher end of the 1/4"
tubing to the reverse osmosis faucet. Secure the tubing in place with a retaining clip.
6. Connect the power cord to your UV filter and plug into wall outlet.
7. Plug the faucet power cord into the FAUCET connection on the back of the reverse osmosis system.