Need help?Do you have a question about the NU Aqua Efficiency Series and is the answer not in the manual?
Key safety and installation recommendations for the RO system.
Specifications for water pressure and quality for system operation.
Instructions for preventing and identifying leaks in the system.
Advice on indoor use, adherence to local codes, and protection measures.
Owner's responsibility for filter changes and component upkeep.
NU Aqua's limitations on liability for damages and system failures.
Details on operating pressure, temperature, and usage guidelines for the system.
Essential tools required for the installation process.
List of all parts included in the reverse osmosis system kit.
Parts for alkaline or UV filter systems not included in the base kit.
Procedures for disconnecting and inserting tubing into fittings.
Instructions on how to install and remove retaining clips.
Technique for cutting tubing to ensure secure connections.
Steps to attach the feed water adapter to the cold water supply.
Important safety warnings regarding cold water connection only.
Steps for locating, securing, and connecting the leak stop valve.
Crucial warning that failure to install the valve voids the warranty.
Marking and drilling the drain pipe for saddle attachment.
Attaching and fastening the drain saddle to the pipe.
Attaching the drain tubing to the installed saddle.
Methods for drilling holes in various countertop materials.
Installing the faucet, washers, nut, and quick connect fitting.
Procedure for inserting and locking the RO system filters.
Routing and connecting all necessary tubing to the RO system.
Securing the alkaline filter bracket to the kitchen cabinet.
Connecting the alkaline filter to the main RO system.
Methods for mounting the UV filter, including adhesive and hard mounts.
Warnings about tubing cuts and ensuring connection security.
Attaching tubing from RO system to UV filter and faucet.
Plugging in the UV filter and faucet power supplies.
Warning not to plug the RO system into a wall outlet yet.
Securing the alkaline filter bracket to the cabinet wall.
Options for mounting the UV filter using adhesive or screws.
Routing tubing for alkaline and UV filters to the RO system.
Connecting power for the UV filter and the RO system.
Reminder not to plug the RO system into a wall outlet prematurely.
Verifying all tubing connections are secure before starting.
Running water for 30 minutes to flush new filters.
Explanation of system status, faucet, and error indicator lights.
Detailed procedure for replacing filters in the RO system.
How to reset the filter indicator lights after replacement.
Flushing the system for 30 minutes after new filters are installed.
Solutions for milky water, air bubbles, taste, and smell.
Diagnosing issues like no power, leaks, or noisy operation.
Resolving faucet light problems and high TDS readings.
What the warranty covers and its duration from purchase date.
Procedure for obtaining product repair or replacement under warranty.
Requirements that must be met for the warranty to remain valid.
List of issues and damages explicitly not covered by the warranty.
Situations and actions that will invalidate the product warranty.
Disclaimers, limitations, and exclusions of the product warranty.
How to contact NU Aqua Systems for warranty claims or inquiries.
Details on the lifetime warranty program with Filter Club subscription.
General| Brand | NU Aqua |
|---|---|
| Model | Efficiency Series |
| Category | Water Filtration Systems |
| Language | English |
To Next Page